How to make Paper Quilling Fringed Flowers

Fringed flowers are one of the easy and beautiful flowers in Quilling. In this post, you will learn how to make paper quilling fringed flowers step by step. To create a paper quilling fringed flower, take a quilling strip of 10mm and hold the strip with a bulldog clip. Here we are using bulldog clip as a guide while cutting the strip as this clip will help us not to cut the whole strip.

Paper between clip should be around 2 to 3mm. Take sharp tip scissors and start cutting the strip, the gap between each cut should be 2mm, cut should be striaght like 90 degree to the edge of the paper. You can fringe the strip narrower or wider depending upon the flower you wants to make, to create delicate flower you need to make cuts narrower. So let’s get started and make 10 different types of quilling fringed flowers.

To make these flowers you need:

1: Paper Quilling fringed flowers with center

This is most common fringed flower, for making this flower take a quilling strip of 10 mm thickness and 9 inches length fold it in half and hold it in a bulldog paperclip with a straight edge. Start cutting the strip using the straight edge of the clip as a guide. Move the clip along the length of the strip as you keep cutting. Once done cutting, unfold it carefully. Take a yellow colored quilling strip of 3 mm thickness and 7 inches length glue it to one end of the pink strip. Use a quilling tool to roll the strip starting at the yellow end. Once all rolled up, glue it to hold it in place. Once done, flare out the cut portion of the rolled up strips to give it a floral look.

2: Double color pom pom fringed flower without center

Take 2 quilling strips of different colors (eg. Red and orange) each of 9 inches length and of 10mm in width. Place the strips on top of each other and hold them in a paper clip with a straight edge. Start cutting the strips using the straight edge of the clip as a guide. Move the clip along the length of the strips as you keep cutting. Use a quilling tool to roll the strips. One done apply the glue at the end of the strip to secure it. Now open the flares to give flower look.

3: Double Layered Fringe Flower

Take a 9 inches long blue coloured quilling strip. Fold it in half and hold it in a paperclip with a straight edge. Start cutting the strip using the straight edge of the clip as a guide. Now Take a 5mm thick quilling strip (9 inches in length) and repeat the same as above. After cutting both the strips, glue the end of one strip and stick the end of other strip to attach them and make a long strip. Use a quilling tool and start rolling from the yellow strip. After rolling the strip stick the end of strip to secure it. Carefully flare out the cut portion of the rolled up strips to give it a floral look.

4: Triple Layered Fringed Flower

Take a 15mm thick pink colored quilling strip (12 inches long). Cut the strip by repeating the same process. Take a yellow colored quilling strip of 3mm thickness and 9 inches length. Glue the strips in order of their thickness in a line. Take a quilling tool and start rolling from the yellow strip all the way to the thickest pink strip. Now as done earlier roll the strip with quilling tool Once the strips are all rolled up, glue them in place. Carefully flare out the cut portion of the rolled up strips to give it a floral look.

5: Twisted Fringed Flower

Take a red colored quilling strip of 10 mm thickness and 10 inches length. Fold the strip in half along the length. Hold the open side of the folded strip in a paper clip with a straight edge. Start cutting the folded side diagonally using the straight edge of the clip as a guide. The gap between each cut should be about 2mm. Move the clip along the length of the strip as you keep cutting. Take a yellow colored quilling strip of 3mm thickness and 6 inches length. Attach the yellow strip to the red one in a line. Take a quilling tool and start from the yellow strip. Roll it and open the flars to give a floral look.

6. Shaded Fringed Flower

Take a yellow colored quilling strip of 10 mm thickness and 10 inches length. Fold it in half and hold it in a paperclip with a straight edge. Start cutting the strip. Once done cutting, unfold it carefully. Take an orange colored quilling strip of 3 mm thickness and 6 inches length. Glue it to the yellow strip to make one long strip. Use a quilling tool to roll up the strips starting from the orange side. Once all rolled up, glue it in place. Flare out the cut portion to give a floral effect. Take an orange colored sketch pen and make lines from the center of the flower to the end of the petals to give it a 3D look.

7: Double Colored Fringe Flower with center

Take a pink and a purple colored quilling strip of 10mm thickness and 8 inches length. Place them on top of each other and Hold it in a paperclip. Start cutting the strip. Move the clip along the length of the strip as you keep cutting. Take a brown colored quilling strip of 3 mm thickness and 8 inches length. Glue it to the cut up quilling strips so that they are in one line. Use a quilling tool to roll up the strips starting from the brown strip. Once all rolled up, glue it in place. Flare out the cut up portion to give it a floral look.

8. Half colored Fringed Flower

Take a yellow colored quilling strip of 10 mm thickness and 8inches length. Place a scale on the strip showing about 4 to 5 mm. Take a red marker or sketch pen and fill in the part covering showing from under the scale. Fold the strip in half and hold it in a paperclip with a straight edge (do not hold the red side ). Start cutting the strip. Take a red colored quilling strip of 3 mm thickness and 4inches length. Glue it to the yellow strip so that they are in one line. Use a quilling tool and start rolling up the strips starting from the red strip. Keep the colored part inside. Roll the strip and glue it at the end. Flare out the cut up portion to give it a floral look.

9. Striped Fringed Flower

Take a cream coloured quilling strip of 10 mm thickness and 8inches length. Place a scale on the strip and make two blue lines (one dark and one light) along the length. Fold the strip in half and hold it in a paperclip with a straight edge (do not hold the blue lined side in the clip). Start cutting the strip. Take a blue coloured quilling strip of 3mm thickness and 4inches length. Glue it to one end of the cut up strip. Use a quilling tool and start rolling the strip starting from the blue strip. Keep the coloured side inside. Roll it and apply the glue at then end if the strip. Flare out the cut up portion to give it a floral look.

10: Single Color quilling pom pom flower

Take a green coloured quilling strip of 10 mm thickness and 17 inches length. Fold it in half and hold it in a paperclip with a straight edge. Start cutting the strip. Take a quilling tool and start rolling up the strip. After rolling till the end apply glue at the end of the strip to secure it. Take the rounded end of the quilling too and give the rolled up strip a push at the bottom (not on the cut portion). This will push the centre of the flower in a dome-like shape. Add some glue at the bottom to hold the shape in place. Flare out the cut up portion to give a floral look.